Trimble NetR5 Base - Leica SR530 Rover

mmsb4u · 04-05-2009, 6:47 AM

Hi everybody,

How can I configure my SR530 Leica Receiver to receive corrections from NetR5 using PDL LPB radio?

gpsnetwerx · 05-19-2010, 2:06 PM

set your netr5 to broadcast rtcm 2.x messages 1,2,18,19 out of a serial port the pdl is attached to. on the 530 set the rtk message type to rtcm 2.x. there are some other config settings that are pertinent, but this is the basic method.

04-05-2009, 6:47 AM	#1
mmsb4u Join Date: Apr 05 2009 Location: Dubai Posts: 1	Trimble NetR5 Base - Leica SR530 Rover Hi everybody, How can I configure my SR530 Leica Receiver to receive corrections from NetR5 using PDL LPB radio?

05-19-2010, 2:06 PM	#2
gpsnetwerx Join Date: Jun 18 2008 Location: tallahassee florida Posts: 72	Re: Trimble NetR5 Base - Leica SR530 Rover set your netr5 to broadcast rtcm 2.x messages 1,2,18,19 out of a serial port the pdl is attached to. on the 530 set the rtk message type to rtcm 2.x. there are some other config settings that are pertinent, but this is the basic method.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Trimble and Leica Forum ?	deni74xi	Mapping, Surveying & Precision Network Discussion	6	11-06-2008 2:07 PM